1500kw Cummins Diesel Generator Set 1875kva 50Hz 3 Phase
Containerized Generator Power Plant
Power Specifications
1) 1500RPM at 50Hz
2) Water Cooled with radiator
3) Turbocharged
Electrical Specifications
1) Power Factor: 0.8 Lagging
2) 3 Phase 4 Pole
3) Insulation: Class H
4) Brushless
5) Self-Excited
6) IP23 Protection
7) AVR regulation
8) Starting by Batteries
Technical specifications
| Genset Model | SHX-1500 |
| Prime Power | 1500KW/1875KVA |
| Standby Power | 1650KW/2063KVA |
| Phase Number | 3 |
| Power Factor | 0.8 |
| Rated Voltage | 230/400V |
| Frequency | 50Hz |
| Rated Current | 2706A |
| Genset Structure | Containerized type |
| Dimension | 1219×2438×2896mm |
| Net Weight | 24000KG |
| Noise level | 85db at 1 meter |
| Fuel Tank Capacity | 8 hours running |
| Engine Model | Cummins QSK60-G3 |
| Engine Features | 16-cylinder, 4 stroke, water cooled, turbocharged |
| Bore*Stroke | 159×190mm |
| Displacement | 60.2L |
| 12-hour Power | 1615KW |
| Fuel Consumption | 370L/h |
| Compression Ratio | 14.5:1 |
| Governor type | Electrical |
| Alternator Model | Stamford S7L1D-F41 |
| Excitation Mode | brushless self-excited |
| Insulation Class | H |
| Protection Class | IP23 |
| Construction Type | SAE Disc-coupling |
| Controler panel | Deepsea |
| DSE7320 | Intelligent and network techniques is used for automatic control
system of diesel generator. It can carry out functions including
automatic start/stop, data measure and alarming.automatic switching
control functions (AMF), especially suitable for the automation
system composed by Mains and Generator |
Containerized Generator Set Features
Containerized generator set integrates the generator with container
of a compact
structure, including the cooling system, fuel supply system and
control system,
which can be carried by vehicles. The dimension of containerized
generator station
is the same with standard containers (20ft, 40ft, and 40ft HC),
there are two
types: step-in containerized generator station with operating room,
maintenance
room and duty room; non-step-in is compactly design.
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to
certify the engine output and fuel consumption
in accordance with the site operating condition specified by
purchaser on the specification datasheet.
1.2 All relevant information drawings pertinent to the testing and
test procedure shall be transmitted to the purchaser
in advance of the test date notification.
1.3 The purchaser shall call for additional testing if test results
are unsatisfactory or marginal. Any equipment rejected
shall be repaired or replaced to the purchaser’s satisfaction and
tests shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or
workmanship shall be replaced or repaired to the purchasers
satisfaction at the manufacturer’s cost.
1.5 The engine and generator shall be tested individually in
accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator
shall be assembled onto the base plate with all auxiliaries,
instruments and controls for a complete test of the generator set.
